Authorized dealer — Exide, Amaron, SF Batteries, Luminous & more

+91 9325417265 Open 10 AM to 8 PM daily

Home Inverter & Backup Batteries

Keep your home and business running through outages. Shop the most reliable tubular and flat plate batteries in Nagpur.

Tubular vs. Flat Plate Technologies

For residential and retail power backup systems in Nagpur, lead-acid deep-cycle batteries are the industry standard. They come in two primary configurations:

  • Tubular Batteries (Recommended): Feature tubular positive plates which hold active material securely, providing a higher cycle life (typically 1200+ cycles at 80% Depth of Discharge). Best for areas in Nagpur experiencing regular or long power cuts.
  • Flat Plate Batteries: Use standard flat lead plates. They charge faster and are cheaper upfront, but have a shorter cycle life. Suitable for urban apartments with rare, short power outages.

Our Recommended Inverter Battery Models

Exide Inva Tubular (IT500)

The gold standard in home power backup. Extra-thick plates for longer charge holding capacity. Excellent low-antimony alloy grids.

Warranty60 Months
Capacity150 Ah
Shop Exide Inverters

Luminous Red Charge

Highly durable tubular battery. Special alloy composition protects against plate corrosion. Outstanding performance in high heat.

Warranty36-48 Months
Capacity150 / 200 Ah
Request Luminous Quote

Amaron Current

Sealed design minimizing water loss. Built with ultra-pure lead components to maintain steady charge acceptance over time.

Warranty36-54 Months
Capacity120 / 150 Ah
Shop Amaron Inverters

Connected Appliance Sizing Guide (150 Ah)

Connected Load (Watts) Common Appliance Setups Approx. Backup Time
150 W 2 LED Tubes + 1 Ceiling Fan + 1 Wi-Fi Router 8 to 9 Hours
300 W 4 LED Tubes + 2 Ceiling Fans + 1 TV 4 to 5 Hours
500 W 6 LED Tubes + 3 Ceiling Fans + 1 TV + 1 Laptop 2.5 to 3 Hours
800 W All lights/fans + 1 Small Refrigerator 1.5 Hours

Note: Actual backup times may vary based on the efficiency of your inverter unit and battery state of health.

Inverter Battery Maintenance Checklist

  • Check Acid Levels: Check the water float indicators every 3 months. Top up only with distilled water when the indicator drops below the green level.
  • Clean Corroded Contacts: Clean any sulphate buildup on battery leads with hot water to prevent resistance and heating.
  • Maintain Ventilation: Keep the battery placed in a well-ventilated open area. Tubular batteries emit minor gases during active charging.